Resin Bandage


Size: 15*180cm    RMB188/roll     24 rolls/carton

Size: 10*180cm    RMB136/roll     32 rolls/carton



1.      Light weight, only 1/3 of traditional plaster bandage.

2.      High intensity, 20 times of plaster bandage intensity in anti-impact strength.

3.      Good permeability which is beneficial for skin metabolism

4.      It is not vulnerable to water. People can take a bath or hydrotherapy.

5.      Good X-ray perspectivity, clear X-ray photo image;

6.      Good plasticity, and it can be molded repeatedly.

7.      No allergic reaction, it could be cut and removed easily.

8.      No special requirement for storage.

9.      It is of environment-friendly material, which can be degradated into water and CO2 when it is buried underground.

Operation Instruction

1. Cutting

To choose resin bandage in suitable specification, cut out necessary size, usually it is 2 layers for upper limbs binding, 3 layers for lower limbs & body binding. And it is OK to add more layers if it is necessary.

2. Softening

To put the cutted resin bandage in about 70 warm water for about 1 minute softening.

3. Flattening

To take out softened resin bandage, remove water droplet in bandage surface, flatten it in table facet, make the adhesion between layers more solid & smooth.

4. Molding

To put resin bandage on wounded body parts, to mold its shape based on clinical requirements. It could be molded in 5 minutes, and could bear weight after complete solidification.

5. Fastening

After molding, sidebands could be utilized for cyclic fastening, 2-4 pcs of sidebands or some bandage in 3-5cm width could be used for fixation.

6. Removal

To use normal scissors for resin bandage removal.